Side Table
Sketches
Initial Materials
Process
Final
Project Brief
Process Mode
Up cycling project, using scrap metal and fabric I was able to create a prototype that later evolved into an entire family of fixtures.
On/ Off
refinements
V7 was selected
filleted edges of channel and hull of whisk, added hang hole.
v6
phase three
v7
refinements
V5 was selected.
thumb channel was made wider
v4
phase two
v5
refinements
V3 was the only model selected
implemented a flat side per expert user’s suggestion
v3
v1
phase one
v2
v3
V1 and V2 are too small, wouldn’t allow me to drive through a thicker batter.
V3 feels unbalanced.
I’d like to see a flat side on V3
Widen the channel on V5, my thumb feels a bit restricted when changing grip.
V7 feels too long, forcing my hand at the top.
Up cycling project, using scrap metal and fabric I was able to create a prototype that later evolved into an entire family of fixtures.
I’d like to see a flat side on V3
V3 was the only model selected
implemented a flat side per expert user’s suggestion
V1 and V2 are too small, wouldn’t allow me to drive through a thicker batter.
V3 feels unbalanced.
v3
v1
v2
v3
phase two
refinements
Widen the channel on V5, my thumb feels a bit restricted when changing grip.
V5 was selected.
thumb channel was made wider
v4
v5
phase three
refinements
V7 was selected
filleted edges of channel and hull of whisk, added hang hole.
V7 feels too long, forcing my hand at the top.
v6
v7
Side Table
Initial Materials
Project Brief
Process Mode
Up cycling project, using scrap metal and fabric I was able to create a prototype that later evolved into an entire family of fixtures.
On/ Off
Up cycling project, using scrap metal and fabric I was able to create a prototype that later evolved into an entire family of fixtures.
